There are several different types of heat reactivated regenerative dryers with molecular sieve desiccant and below we discuss each type along with their advantages and disadvantages. In all heated type regenerative dryers with molecular sieve desiccant the heat source can be provided by either electric or steam with the most common being electric.View more
Other variations for standard pressure/temperature conditions are 14.7 psia and 32F. As such, these variations can cause confusion and result in a mis-match between the compressed air with Molecular Sieve supply and compressed air with Molecular Sieve demand.View more
Although this technology can also be applied to the lower capacity range, the fact that thermal mass dryers with molecular sieve are already an excellent solution in this area means that the greater capacity range is expected to be the primary focus of development efforts.View more
the controller also features a memory bank and error code display functionality while also allowing the user to connect a separate dew point measurement device. Even without it, however, during all load phases the refrigeration dryer with molecular sieve maintains a stable pressure dew point and keeps coolant compressor with molecular sieveView more
Furthermore, the new thermal mass technology means that the entire dryer can be significantly lighter and more compact – the new units require up to 46 percent less installation space and weigh around 60 percent less than conventional thermal mass dryers with 4A molecular sieve on the market.View more
The new refrigeration dryers with molecular sieve , on the other hand, work with an aluminium heat exchanger that combines these two different heat exchanger systems – an air-air heat exchanger between the cold, outgoing compressed air and the warm, incoming compressed air, as well as another compressed air-PCM heat exchanger.View more
They are capable of absorbing a significant amount of heat before melting completely; consider that the same amount of energy is required to change solid ice with a temperature of 0 °C to a liquid as is needed to heat water from 0 °C to 80 °C.View more
By subscribing to our mailing list you will always be update with the latest news from us.
We never spam!