0.4-0.8mm 1-2mm Lithium Zeolite Lix Molecular Sieve Adsorbent Factory Direct Supply Wholesale Price for medical oxygen generator

PRODUCTS DESCRIPTION

Product description:

Lithium molecular sieve is lithium based high performance oxygen enrichment sieve bed mainly used in PSA and VPSA oxygen concentrator device. Lithium molecular sieve oxygen sieve bed has the characteristics of higher N2 adsorption capacity, high N2 with O2 selectivity and easy desorption etc. Its N2 adsorption capacity is 2-3 times larger than A type oxygen enrichment molecular sieve bed. At the same time, Lithium molecular sieve oxygen molecualr sieve bed has good wear resistance and longer service life. It can significantly increases the economic benefits of oxygen production by lowering operating costs and energy consumption. Normally, Lithium molecular sieve is designed for portable oxygen generator 1-5L/Min, JLOX-103 is designed for industrial oxygen plant, oxygen purity is up to 93%±3%.

More Details:

Synonym: Lithium molecular sieve, oxygen sieve bed, PSA and VPSA oxygen molecular sieve

CAS NO.: 1318-02-1

Application:

1. Lithium molecular Sieve beds used for industrial oxygen concentrator in Waste water treatment field

2. Lithium molecular sieve beds used for oxygen concentrator in Aquaculture field for fish farming

3. Lithium molecular Sieve bed for oxygen concentrator 1-5L/Min in medical oxygen market

4. Oxygen concentrator sieve bed material for ozone production filed

Lithium Zeolite Lix Molecular Sieve Adsorbent Factory Direct Supply Wholesale Price for medical oxygen generator

Stroage:

This oxygen concentrator sieve bed material is packed in aluminum bags and sealed in 25 kg air-tight drums. Lithium molecular sieve is very sensitive to moisture, please do not open before using. Storage temperature range: -10 ~ 45℃. Avoid direct sunlight!

Packing:

25kg/drum with inner aluminum foil bag, 125 kg/drum with inner aluminum foil bag

Lithium Molecular Sieve

Send us email if you need this oxygen concentrator sieve bed material Lithium molecular sieve MSDS.

Technical Specification

ITEM	UNIT
Product Type		Li-X
Diameter	mm	1.2-2.0
Static N 2 Adsorption	mL/g	≥22.5
Bulk Density	g/ml	0.60
Moisture Content wt.%	%	≤0.5
Abrasion	%	≤0.1
Crush Strength	N	≥12
N 2 /O 2 Separation	NL/g	≥6.0
LOSS ON IGNITION	%	≤1
(WT%, 575℃，1HR)	mm	1.2-2.0

"Note：This is normal specification, in case of a particular application, application, please contact us by email at info@fznewmaterials.com for technical information."