Is an innovative leader in the developing and manufacturing of Industrial & Agricultural new materials and molecular sieve series products
Single component, cementitious, high strength , shrinkage compensated, fibre reinforced, thixotropic mortar. Suitable for concrete repairs with layer thicknesses 10-40 mm
Molecular sieves are desiccants with very specific properties. They are synthetically produced alumina silicates. Zeolites will differentiated because of their crystal lattice structure, since this gave them different sized of pores.
Attapulgite is a naturally mined clay. It is a needle-like clay mineral composed of magnesium-aluminum silicate. Major deposits occur naturally in Georgia, USA. Attapulgite and sepiolite have similar structures and both can be used in salt-water mud to provide low-shear rate viscosity for lifting cuttings out of the annulus
Type 3A molecular sieves should be used to dry dehydration solvents for electron microscopy. Most common solvents (acetone, ethanol, and methanol, etc.) need to be anhydrous for electron microscopy embedding work using epoxy resins, yet they have a tendency to pick up atmospheric water when bottles are opened.
Attapulgite clay, thickeners and rheology modifiers, and land reclamation at a Mingguang mining site
This clay-based material removes trace water and iron from nitrogen tetroxide/nitric oxide mixtures.
Attapulgite used in dry mixing mortar is made from high grade natural Attapulgite (the main content is Magnesium aluminum silicate), which is combined with polymer after modification. It is mainly used to control the thickening, anti-sagging and water retention properties. It owns advantages of less dosage, good water retention,
ZSM-5 is a synthetic zeolite which contains silica (Si) and alumina (Al) with the ratio of silica greater than the alumina. The catalyst is known as ZSM-5 because it has a pore diameter of 5 (angstroms) and it has more than five Si/Al ratios.
Attapulgite used in dry mixing mortar is made from high grade natural Attapulgite (the main content is Magnesium aluminum silicate), which is combined with polymer after modification. It is mainly used to control the thickening, anti-sagging and water retention properties. It owns advantages of less dosage, good water retention, strong thixotropy a
• Removal of initial trapped moisture inside the dual pane window and the moisture that will permeate during the life of the unit to prevent fogging • Removal of vapors from organic sealing materials, paint and cleaning solvents introduced during window
Adsorption of nitrogen from air using a pressure or vacuum swing system to obtain oxygen purity up to 95%
• Removal of water and sulfur compounds to protect gas transmission pipelines • Dehydration of natural gas liquids • Desulfurization of feed streams for ammonia and other chemical plants • Removal of mercury, preventing damage to aluminum heat exchangers
Submit your requirement and questions
NEWSLETTER SIGNUP
By subscribing to our mailing list you will always be update with the latest news from us.
We never spam!
About Us
Products
Markets
Cases
News
FAQ
Contact Us
Oxygen Sieve Ltihum
Molecular Sieve 3A
Molecular Sieve 4A
Molecular Sieve 5A
Molecular Sieve 13X
Hydrogen Purification 5A
Oxygen Sieve Sodium
Oxygen Sieve 13XHP
XH-Refrigerant Desiccant
Auto Brake Dessicant
Anti Sagging Agent
Molecular Sieve Binder
Anti Settling Agent
Inorganic Gel thickener
Bleach Earth
Suspension Agent
Magnesium Aluminum Silicate
Suspension Thixotropic Agent
Thickener
Thixotropic Agent
ZSM5 Moleuclar Sieve
CaX Moleuclar Sieve
USY Moleuclar Sieve
CaY Moleuclar Sieve
VOC Adsorbent
NaY Moleuclar Sieve
AgX Moleuclar Sieve
Activated Alumina
LiLSX Moleuclar Sieve
Copyright © Mingguang Feizhou new materials Co., Ltd. All Rights Reserved. | Sitemap
