5-7 mm 2-4 mm 1-3mm

1. Activated alumina desiccant is a special process made of spherical activated alumina. Its own property is non-toxic, odorless, non-chalky, insoluble in water, white spherical appearance, strong ability to adsorb water. Under certain operating conditions and regeneration conditions, its drying depth up to the dew point temperature below -40 ºC, is a trace of the depth of water and efficient drying agent.

Alumina Oxide Desiccant is mainly used to dry liquids and gases. Widely used in petrochemical gas, liquid-phase drying, for the textile industry, oxygen industry and automation instrument wind drying, air separation industry pressure swing adsorption.And for petrochemical gas-liquid deep drying.

2. Activated alumina dechlorination agent is mainly used for petroleum and petrochemical industries in the removal of impurities such as hydrogen chloride, chlorinated alkanes can also remove hydrogen chloride to generate olefins.

Technical Parameters:

3. Desiccant Air Dryer

It is an essential chemical material for hydrogen peroxide production.It has many capillary channels, large surface area. It is also based on the polarity of adsorbed substances to determine the strong affinity for water, oxides, acetic acid, alkali, etc. It is a water desiccant, but also adsorbed polar molecules adsorbent.

This product is used for the regeneration of working solution in anthraquinone hydrogen peroxide production. Especially for the production of palladium catalyst and three-component Nickel catalyst.

4. Activated alumina dechlorination agent is with fluoride removal capacity, good physical properties, high strength, non-toxic, tasteless, soaked in water,no swelling, no rupture.The decontaminated water can reach the drinking water sanitation standard.

Technical Parameters: