Activated alumina desiccant is a special process made of spherical activated alumina. Its own property is non-toxic, odorless, non-chalky, insoluble in water, white spherical appearance, strong ability to adsorb water. Under certain operating conditions and regeneration conditions, its drying depth up to the dew point temperature below -40 ºC, is a trace of the depth of water and efficient drying agent.
PRODUCTS DESCRIPTION
Production description:
Activated alumina desiccant is mainly used to dry liquids and gases. Widely used in petrochemical gas, liquid-phase drying, for the textile industry, oxygen industry and automation instrument wind drying, air separation industry pressure swing adsorption.And for petrochemical gas-liquid deep drying.
It is an essential chemical material for hydrogen peroxide production.It has many capillary channels, large surface area. It is also based on the polarity of adsorbed substances to determine the strong affinity for water, oxides, acetic acid, alkali, etc. It is a water desiccant, but also adsorbed polar molecules adsorbent.
This product is used for the regeneration of working solution in anthraquinone hydrogen peroxide production. Especially for the production of palladium catalyst and three-component Nickel catalyst.
Technical Parameters:
Item | Specifications | |||
Particle size mm | 7-14 mesh | φ3--5 | ||
Appearance | White balls | |||
Bulk Density g/cm3 | 0.76--0.85 | 0.68--0.75 | ||
Strength N/ball | >45 | ≥70 | ||
Surface area m2/g | 200--260 customized | |||
Pore size cm3/g | 0.4--0.46customized | |||
Water Absorption % | ≥50 | |||
4. Activated alumina fluoride removal agent is with fluoride removal capacity, good physical properties, high strength, non-toxic, tasteless, soaked in water,no swelling, no rupture.The decontaminated water can reach the drinking water sanitation standard.
Technical Parameters:
Item | Specifications | ||
Particle size mm | Φ1.5-2 | ||
Appearance | White balls | ||
Bulk Density g/cm3 | 0.75--0.85 | ||
Strength N/ball | ≥40 | ||
Surface area m2/g | 280--360 customized | ||
Pore size cm3/g | 0.38--0.42 customized | ||
Fluoridize Static absorbing ratio mgF/gAl2O3 | 2.1 | ||
**The above information is for customers’ reference only. Performance characteristics vary depending on specific application. please contact us by email at info@fznewmaterials.com if detailed application method for materials needed.
NEWSLETTER SIGNUP
By subscribing to our mailing list you will always be update with the latest news from us.
We never spam!
Copyright © Mingguang Feizhou new materials Co., Ltd. All Rights Reserved. | Sitemap | Technical Support: 
