Molecular Sieve Dehydration For Natural Gas Ethylene Purification

The molecular sieve dehydration unit that can remove the water vapor from natural gas with about 30Nm3/h flow rate.

The amount of water vapor in the natural gas (feed gas) is about 110mg/Nm3. 

The amount of water vapor in the final gas should be <=0.1ppmv.

Molecular Sieve Dehydration For Natural Gas

Dehydration by Adsorption

Advantages of Molecular Sieves:

Very low dew point and water content can be obtained

Best suited for large volumes of gas under very high pressure

Dehydration of very small quantities of natural gas at low cost

Insensitive to moderate changes in gas temperature, flow rates, and pressure

They are relatively free from problems of corrossion, foaminig, ect

Some types can be used for simultaneous dehydration and sweetening

"Note：This is normal specification, in case of a particular application, application, please contact us by email at info@fznewmaterials.com for technical information."